|
The aerospace industry
established the International Aerospace Quality Group (IAQG) in 1998
for the purpose of achieving significant improvements in quality and
safety, and reductions in cost, throughout the value stream. This
organization includes representation from aerospace companies in the
Americas, Asia/Pacific, and Europe. |
|
Standards published exclusively within the Americas
have a suffix of 90xx and an AS prefix. These standards may be adopted
internationally and when this happens the number is changed to a
91xx-series standard. All AS standards are published by the SAE (Society
of Automotive Engineers).
European standards are published by the AeroSpace and Defense
(ASD)
organization and carry an EN suffix. The Society of Japanese Aerospace
Companies publishes the standards in Japan using either a JIS Q or a
SJAC prefix. SDOs in Brazil, China, Korea, Russia and other nations
publish some of the IAQG standards, using the same numeric suffix
identification or other cross reference to the base standards. |
Need help?
See AS9100B
Implementation Guide for guidance on the transition
Use our Excel based AS9100B Audit Check List and
Gap Analysis Tool to reveal the gaps and measure compliance
Make the transition to AS9100B with our book on
Converting a QMS using the process approach
AS9100B is 90% ISO 9001:2000 -
Our Quality
System Handbook explains all
Learn how to audit Aerospace processes using
Process Auditing
techniques
If you are running several management systems, integrate now using our
guide
Integrated Management Systems |
|
Standard |
Title |
Comment |
|
AS9000 |
Aerospace Basic
Quality System Standard |
Cancelled February 2004 |
|
AS9006 |
Deliverable
Aerospace Software Supplement for AS9100A |
This document supplements the requirements of
AS9100:2001 for software |
|
AS9100B |
Quality management systems - Aerospace Requirements |
This document standardizes, to the greatest extent
possible, quality management system requirements for the aerospace
industry. It includes ISO 9001:2000 and specifies additional
requirements for a quality management system for the aerospace
industry. Revision B removes the text that was based in ISO 9001:1994
because ISO 9001:1994 is now obsolete |
|
JISQ9100 |
|
EN9100 |
|
AS9101B |
Quality management systems assessment |
This document defines the content and the
presentation of AS9100 Assessment Reports and provides the
questionnaire to be used during the "on site" quality system
assessment of organizations |
|
SJAC9101 |
|
EN9101 |
|
AS9102A |
First Article Inspection Requirement |
This document provides a consistent
documentation requirement for aerospace components first article
inspection. |
|
SJAC9102 |
|
EN9102 |
|
AS9103 |
Variation Management in Key
Characteristics |
Established variation management
requirements for Key Characteristics |
|
SJAC9103 |
|
EN9103 |
|
AS9110 |
Quality Management Systems - Aerospace - Requirements for
Maintenance Organizations |
This standard includes ISO 9001:2000 quality management
system requirements and specifies additional requirements for a
quality management system for aerospace maintenance organizations |
|
EN9110 |
|
EN9111 |
Quality Management Systems - Assessment Applicable to Maintenance
Organizations |
|
|
AS9120 |
Quality management system -Aerospace requirements for
stockist distributors |
This standard includes ISO 9001:2000 quality management
system requirements and specifies additional requirements for a
quality management system for the aerospace industry applicable to
stockist distributors |
|
EN9120 |
|
AS9121 |
Quality management systems assessment - Applicable to
Stockist Distributors |
The purpose of this document is to define the content
and the presentation of the Assessment Report of AS9120 |
|
EN9121 |
|
AS9131 |
Quality Systems - Non-conformance
Documentation |
This document defines to supplier/subcontractor common
information and documentation required to inform customers, when
applicable about nonconformity |
|
SJAC9131 |
|
EN9131 |
|
AS9132 |
Data Matrix (2D)
Coding Quality Requirements for Parts Making |
This Standard defines uniform Quality and Technical
requirements relative to metallic parts marking performed in using
"Data Matrix symbology" (2D) coding used within the aerospace
industry. |
|
SJAC9132 |
|
EN9132 |
|
AS9133 |
Qualification Procedure for
Aerospace Standard Parts |
This document provides a basic uniform method for
ensuring that aerospace standard parts (products) conform with the
requirements of technical specifications referring to qualified parts
and for a manufacturer of such parts to have a qualified management
system at least equivalent to AS/EN/SJAC9100. |
|
SJAC9133 |
|
EN9133 |
|
ARP9134 |
Supply Chain Risk Management Guide |
|
|
EN9134 |
